Browsing by Author "Waidi, Yusuf"

Now showing 1 - 3 of 3

Catalytic hydrothermal liquefaction of orange peels into biocrude: An optimization approach by central composite design
(Elsevier B.V., 2023-08) Kariim, Ishaq; Waidi, Yusuf; Swai, Hulda; Kivevele, Thomas
Global instability, persistent increase in pump-price, inflation and depletion of fossil fuel resources amidst the continuous discharge of greenhouse gases from fossil fuels combustion call for urgent attention. The application of novel catalyst towards an improved biocrude production and enhanced biomass conversion are required for effective performance of hydrothermal liquefaction of biomass feedstocks. In the present study, iron supported carbon nanospheres (Fe/CNSs) catalyst has been developed using wet impregnation approach and explored for its catalytic potency in improving yield of biocrude using an optimization approach; central composite design. Hydrothermal liquefaction (HTL) was adopted as a process route where the catalyst dosage (3–6 wt%) and the reaction temperature (330–430 °C) were optimized on the constant weight of orange feedstock (10 g), reaction time of (15 mins) and solvents’ ratio of 3:1 (acetone to ethanol). The performance of the catalyst was found to be aided with the even dispersion of the Fe on the surfaces of the CNSs support and improved surface area. The effects of reaction temperature were observed to be more progressive on biocrude yield formation over the catalyst loading. The optimum biocrude yield, solid residue, biomass conversion and gas yield were obtained to be 71.09 wt%, 28.18 wt%, 71.82 wt% and 40.14 mL/g at 430 °C and 3 wt% catalyst loading. The obtained analysis of variance suggests a good correlation between the experimental and predicted data in all responses. The selectivity of Fe/CNSs catalyst to high yield of phenolics and aromatic compounds in the biocrude suggest that, the biocrude can be further be upgraded into transportation fuel through hydrodeoxygenation process. The findings have further suggested the viability of the developed Fe/CNSs as an effective catalyst for improved HTL products in a batch reactor.
Catalytic hydrothermal liquefaction of orange peels into biocrude: An optimization approach by Central Composite Design
(Elsevier B.V., 2023-06-01) Kariim, Ishaq; Waidi, Yusuf; Swai, Hulda; Kivevele, Thomas
Global instability, persistent increase in pump-price, inflation and depletion of fossil fuel resources amidst the continuous discharge of greenhouse gases from fossil fuels combustion call for urgent attention. The application of novel catalyst towards an improved biocrude production and enhanced biomass conversion are required for effective performance of hydrothermal liquefaction of biomass feedstocks. In the present study, iron supported carbon nanospheres (Fe/CNSs) catalyst has been developed using wet impregnation approach and explored for its catalytic potency in improving yield of biocrude using an optimization approach; central composite design. Hydrothermal liquefaction (HTL) was adopted as a process route where the catalyst dosage (3-6 wt.%) and the reaction temperature (330-430 oC) were optimized on the constant weight of orange feedstock (10 g), reaction time of (15 mins) and solvents’ ratio of 3:1 (acetone to ethanol). The performance of the catalyst was found to be aided with the even dispersion of the Fe on the surfaces of the CNSs support and improved surface area. The effects of reaction temperature were observed to be more progressive on biocrude yield formation over the catalyst loading. The optimum biocrude yield, solid residue, biomass conversion and gas yield were obtained to be 71.09 wt.%, 28.18 wt. %, 71.82 wt.% and 40.14 mL/g at 430 oC and 3 wt.% catalyst loading. The obtained analysis of variance suggests a good correlation between the experimental and predicted data in all responses. The selectivity of Fe/CNSs catalyst to high yield of phenolics and aromatic compounds in the biocrude suggest that, the biocrude can be further be upgraded into transportation fuel through hydrodeoxygenation process. The findings have further suggested the viability of the developed Fe/CNSs as an effective catalyst for improved HTL products in a batch reactor.
Optimization of solvothermal liquefaction of water hyacinth over PTFE-acid mediated kaolin catalyst for enhanced biocrude production
(Elsevier, 2024-03-01) Kariim, Ishaq; Bakari, Ramadhani; Waidi, Yusuf; Kazmi, Wajahat; Swai, Hulda; Kivevele, Thomas; Malla, Sunita
The invasive nature of water hyacinth and the need for renewable energy sources have necessitated this research. Catalyst development through enhanced pore structure and process parameters optimization are requirements for effective mass transport during the biomass valorization and improved biocrude formation during solvothermal liquefaction process. In this present study, the effects of temperature (250–340 °C), residence time (10–20 min) and catalyst loading (10–13 wt%) on biocrude, biochar, gas yield, and biomass conversion were optimized using a Box-Behnken experimental design. The developed catalyst through the application of polytetrafluoroethylene (PTFE) for pore structure enhancement was characterized using SEM, BET and XRD techniques. The process optimization found maximum biocrude yield (32.0 wt%), minimum biochar yield (19.4 wt%) and maximum conversion efficiency (80.6%) at 340 °C, 20 min residence time, and 13 wt% catalyst loading. The GC-MS result of the biocrude produced at the optimum conditions (13 wt% catalyst loading) consists of ketones (32.2%), acids (22.3%) and had 65.2% carbon, 7.3% hydrogen, HHV of 29.4 MJ/kg and H/C ratio of 1.34 while an increment in catalyst loading of 20 wt% enhanced the overall biocrude properties with HHV of 35.50 MJ/kg. This result depicts the suitability of the PTFE modified acid treated kaolin for high quality biocrude production through valorization of water hyacinth into a candidate for renewable energy material.