Browsing by Author "Kazmi, Wajahat"

Now showing 1 - 4 of 4

Optimization of solvothermal liquefaction of water hyacinth over PTFE-acid mediated kaolin catalyst for enhanced biocrude production
(Elsevier, 2024-03-01) Kariim, Ishaq; Bakari, Ramadhani; Waidi, Yusuf; Kazmi, Wajahat; Swai, Hulda; Kivevele, Thomas; Malla, Sunita
The invasive nature of water hyacinth and the need for renewable energy sources have necessitated this research. Catalyst development through enhanced pore structure and process parameters optimization are requirements for effective mass transport during the biomass valorization and improved biocrude formation during solvothermal liquefaction process. In this present study, the effects of temperature (250–340 °C), residence time (10–20 min) and catalyst loading (10–13 wt%) on biocrude, biochar, gas yield, and biomass conversion were optimized using a Box-Behnken experimental design. The developed catalyst through the application of polytetrafluoroethylene (PTFE) for pore structure enhancement was characterized using SEM, BET and XRD techniques. The process optimization found maximum biocrude yield (32.0 wt%), minimum biochar yield (19.4 wt%) and maximum conversion efficiency (80.6%) at 340 °C, 20 min residence time, and 13 wt% catalyst loading. The GC-MS result of the biocrude produced at the optimum conditions (13 wt% catalyst loading) consists of ketones (32.2%), acids (22.3%) and had 65.2% carbon, 7.3% hydrogen, HHV of 29.4 MJ/kg and H/C ratio of 1.34 while an increment in catalyst loading of 20 wt% enhanced the overall biocrude properties with HHV of 35.50 MJ/kg. This result depicts the suitability of the PTFE modified acid treated kaolin for high quality biocrude production through valorization of water hyacinth into a candidate for renewable energy material.
Solvothermal liquefaction of orange peels into biocrude: An experimental investigation of biocrude yield and energy compositional dependency on process variables
(Elsevier, 2024-01) Kariim, Ishaq; Park, Ji-Yeon; Kazmi, Wajahat; Swai, Hulda; Lee, In-Gu; Kivevele, Thomas
The efficient valorization of biomass for energy-derived biocrudes is essential for effective waste management. However, the production of biocrudes with high energy and reduced oxygen contents during the liquefaction process requires further insight. Therefore, the impact of reaction temperature, residence time, and ethanol: acetone on the energy compositions and bioproduct’s yield enhancement were investigated. The biocrudes obtained were characterized using elemental analysis, GC–MS, FTIR, GPC and TGA to understand the effects of process parameters on the biocrudes’ compositions. An improved HHV (38.18 MJ/kg) and lower O/C ratio (0.11) were obtained at 430 °C, 35 min and 50% ethanol with a significant improvement in the enhancement factor, deoxygenation, and percentage hydrogenation of 2.63, 36.88%, and 77.87%, respectively. The presence of ketones, hydrocarbons, phenolics and aromatics of 23.74, 4.28, 37.20 and 17.81% respectively indicate the potential of the obtained biocrude as renewable energy sources upon further upgrading.
Solvothermal liquefaction of orange peels into biocrude: An experimental investigation of biocrude yield and energy compositional dependency on process variables
(Elsevier, 2024-01) Kariim, Ishaq; Park, Ji-Yeon; Kazmi, Wajahat; Swai, Hulda; Lee, In-Gu; Kivevele, Thomas
The efficient valorization of biomass for energy-derived biocrudes is essential for effective waste management. However, the production of biocrudes with high energy and reduced oxygen contents during the liquefaction process requires further insight. Therefore, the impact of reaction temperature, residence time, and ethanol: acetone on the energy compositions and bioproduct’s yield enhancement were investigated. The biocrudes obtained were characterized using elemental analysis, GC–MS, FTIR, GPC and TGA to understand the effects of process parameters on the biocrudes’ compositions. An improved HHV (38.18 MJ/kg) and lower O/C ratio (0.11) were obtained at 430 °C, 35 min and 50% ethanol with a significant improvement in the enhancement factor, deoxygenation, and percentage hydrogenation of 2.63, 36.88%, and 77.87%, respectively. The presence of ketones, hydrocarbons, phenolics and aromatics of 23.74, 4.28, 37.20 and 17.81% respectively indicate the potential of the obtained biocrude as renewable energy sources upon further upgrading.
Solvothermal liquefaction of orange peels into biocrude: An experimental investigation of biocrude yield and energy compositional dependency on process variables
(Elsevier, 2024-01) Kariim, Ishaq; Park, Ji-Yeon; Kazmi, Wajahat; Swai, Hulda; Lee, In-Gu; Kivevele, Thomas
The efficient valorization of biomass for energy-derived biocrudes is essential for effective waste management. However, the production of biocrudes with high energy and reduced oxygen contents during the liquefaction process requires further insight. Therefore, the impact of reaction temperature, residence time, and ethanol: acetone on the energy compositions and bioproduct’s yield enhancement were investigated. The biocrudes obtained were characterized using elemental analysis, GC–MS, FTIR, GPC and TGA to understand the effects of process parameters on the biocrudes’ compositions. An improved HHV (38.18 MJ/kg) and lower O/C ratio (0.11) were obtained at 430 °C, 35 min and 50% ethanol with a significant improvement in the enhancement factor, deoxygenation, and percentage hydrogenation of 2.63, 36.88%, and 77.87%, respectively. The presence of ketones, hydrocarbons, phenolics and aromatics of 23.74, 4.28, 37.20 and 17.81% respectively indicate the potential of the obtained biocrude as renewable energy sources upon further upgrading.